top of page
ACLD: Aluminum Curved Linear Bar Diffuser
The Aluminum Curved Linear Bar Diffuser is made of extruded aluminum alloy profiles. Its outer frame and blades are hand-bent and machine-bent according to the curvature. Craftsmen adjust each component according to different curvatures.
Standard Construction
- Material: Extruded Aluminum
- Nominal length: 100mm - 1500mm
- Nominal Width: 50mm - 800mm
- Minimum Radius: R=20mm
- Minimum Height: 20mm (+2mm For Blank-off Plate)
- Oversize: Multiple sections with aglinment pins
- Curved Corner/Trapezium construction also available
- Finish: Enamel Paint/Powder Coat/Mil/Woodgrains/etc.,
Options
- Flange: 19mm Only
- Blade Deflection: 0° Only
- Core: Removable Core/Fixed
- Accessories: Blank-off Plate/Perforated Plate/etc.,
- Color: RAL/PANTONE/NIPPON/DULUX ICI/etc.,
How to order
- Aluminum curved matte white 0 degree leaf - 19mm edge - movable bladder - blackened - round diameter neck gauge Dia. 2000
- Code: ACLD-OM/19/R/BP/NECK/DIA.2000mm/Matt White
Border Calculation Formula
- B = Base Size (Meter)
- Assuming a 20mm edge is chosen, the face value is 150mm.
- Neck gauge = 120mm
- Ceiling height = 130mm
- Air vent hole = 125mm
| border | Neck | Tianhua left a roar | Wind throat | Neck height |
| 20mm | B-30mm | B-20mm | B-25mm | 20mm |
| - | - | - | - | - |
| - | - | - | - | - |
Frequently Asked Questions
Q: With a 20mm frame and a 150mm vent surface, how many holes should be left in the ceiling?
A: Subtract 26mm from the inner neck (124mm), so a 130mm opening should be left.
(6mm is the thickness reserved for blackening and connecting the bellows material)
If you need any assistance, you can consult our 24-hour online text customer service / customer service mailbox , and we will provide you with service at any time.
bottom of page